How much does it cost to replace an electrical panel?

Most homeowners pay about $900–$2,200 to replace an electrical panel, averaging around $1,500 — a standard 200-amp upgrade typically lands $1,300–$2,000. Big service upgrades (new meter base, a 400-amp panel, rewiring) or high-cost metros can reach $4,000 or more. Labor, permits, and the meter/service work — not the panel hardware — are the biggest part of the cost.

How much is a 200-amp panel upgrade?

A 200-amp panel upgrade typically runs $1,300–$2,000. The price depends on whether the meter base and service mast also need work, your local permit fees, and the condition of the existing wiring; difficult installs or high-cost metros run higher.

Do I need a permit to replace an electrical panel?

Almost always yes — panel work requires a permit and inspection in most jurisdictions, and that cost is built into a licensed electrician's quote. Skipping the permit risks insurance and resale problems.

Should I upgrade to 200 amps?

Many older homes have 100-amp service, which can be tight for modern loads like EV chargers, heat pumps, and large appliances. Upgrading to 200 amps future-proofs the home, which is why it's the most common panel replacement.

Electrical panel replacement cost in Los Angeles

Electrical panel replacement in Los Angeles costs about $1,000 to $4,500 (typically $1,700) — local prices run about 13% above the national average.

These figures adjust our national electrical panel replacement range to Los Angeles's local cost level — see the method and sources below.

Low

$1,000

Typical

$1,700

High

$4,500

How we localized this

We start from our national electrical panel replacement range of $900–$4,000 and adjust it for Los Angeles, where costs run about 13% above the national average. Los Angeles is one of the priciest U.S. metros for home work: construction labor runs roughly 17% above the national average and local construction-cost indices land about 14–20% higher. Because materials are priced roughly nationally everywhere, the effective home-improvement premium is somewhat lower than the headline index — we apply about 13%. Strict permitting and inspections add further time and cost. Materials are priced roughly nationally, so treat this as an approximation — your actual price depends on your home, contractor, and project specifics.

Los Angeles cost sources (2)

Changing Compensation Costs in the Los Angeles Metropolitan Area — U.S. Bureau of Labor Statistics
Construction Cost Index in Los Angeles: Price Trends and Budget Guide 2026 — Design Transition Studio

Los Angeles is among the most expensive U.S. metros for home work. Construction labor runs well above the national average, and strict permitting and inspections — including seismic requirements and California's Title 24 energy rules — add both time and cost. Permit timelines can be long, so budget for them. Demand for upgrades like 200-amp panel replacements is high as homes add EV chargers and electrify.

Estimate your Los Angeles electrical panel replacement

Adjust for amperage and scope. The estimate starts from our published range.

Your area

Adjusts the estimate to local cost levels. Pick a metro or leave on national.

Service size

Scope of work

Access

Estimated cost for your options in Los Angeles

$1,000 – $4,500

Typical: $1,700

Adjusted for Los Angeles — costs there run about 13% above the national average.

How we got this

Starts from our published electrical panel replacement range of $900–$4,000, adjusted for:

Service size: 200-amp (standard upgrade)×1
Scope of work: Panel swap only×1
Access: Easy access×1
Area: Los Angeles×1.13

These figures are planning estimates compiled from public cost data on the dates shown — not quotes, bids, or guarantees. Real prices vary widely with your home, location, materials, permits, and contractor. Always get itemized written quotes from licensed local pros before budgeting or hiring.

What changes the price

Service amperage — Raises cost
Upgrading from 100 to 200 amps — or to 400 amps for a large home — raises cost.
Meter base / service mast — Raises cost
Replacing the meter base or service mast alongside the panel adds labor and utility coordination.
Permit & inspection — Raises cost
Panel work requires a permit and inspection in most areas, built into the quote.
Old or aluminum wiring — Raises cost
Bringing old or aluminum wiring up to code adds significant cost.
Panel brand — Varies
Some brands and smart panels cost more than standard ones.

Get real quotes for your Los Angeles electrical panel replacement

Our ranges are for planning. The only way to know your real price is itemized quotes from licensed local pros — always get at least three before you hire.

Tip: search for licensed, insured Los Angeles electrical panel replacement contractors in your area, check reviews and references, and compare written itemized bids — not just bottom-line numbers.

Electrical panel replacement cost — FAQ

How much does it cost to replace an electrical panel?: Most homeowners pay about $900–$2,200 to replace an electrical panel, averaging around $1,500 — a standard 200-amp upgrade typically lands $1,300–$2,000. Big service upgrades (new meter base, a 400-amp panel, rewiring) or high-cost metros can reach $4,000 or more. Labor, permits, and the meter/service work — not the panel hardware — are the biggest part of the cost.
How much is a 200-amp panel upgrade?: A 200-amp panel upgrade typically runs $1,300–$2,000. The price depends on whether the meter base and service mast also need work, your local permit fees, and the condition of the existing wiring; difficult installs or high-cost metros run higher.
Do I need a permit to replace an electrical panel?: Almost always yes — panel work requires a permit and inspection in most jurisdictions, and that cost is built into a licensed electrician's quote. Skipping the permit risks insurance and resale problems.
Should I upgrade to 200 amps?: Many older homes have 100-amp service, which can be tight for modern loads like EV chargers, heat pumps, and large appliances. Upgrading to 200 amps future-proofs the home, which is why it's the most common panel replacement.

Cost data compiled June 13, 2026.

Sources (2)

Cost To Replace Electrical Panel [2026 Data] — Angi
Cost To Replace Electrical Panel / Upgrade Breaker Box Amps [2026] — HomeGuide

Range synthesized from the editorially-independent cluster (Angi $518–$2,189, avg ~$1,344, with 200-amp upgrades $1,300–$2,000). Two contractor-blog sources that quoted $1,300–$3,000 were de-weighted as high-biased, not used as the anchor — they had inflated the earlier $2,200 average. Metro-level breakdowns are coming as we verify local data.

Compare other locations

See all Los Angeles electrical costs on the Los Angeles electrical page.

↑